Är det någon som har erfarenhet av denna kam, tycker själv att den verkar lite för tam?
Är mer inne på en Engle W120 eller en W125.
SCAT C20 Type 1 Camshaft, 1.1 or 1.25 Rockers, 20003 is designed for 1.1-1.25 rockers, and it's specs are .320" Cam Lift, .350"/1.1 Rockers and .400"/1.25s, 277 degrees of advertised duration, and 234 degrees of duration at .050", on a 108 Lobe Center.
SCAT camshafts have been around seemingly FOREVER, but there is a reason for that (their grinds work well!). While not as State Of The Art as a Web-Cam or a newer FK Series Engle, these are great for the enthusiast that has to watch his pennies!
This cam is similar to the Engle FK-41 grind, which is is a great cam for engines with dual 1bbl carbs, or a single 2bbl. Powerband is from off-idle to 4000. It is very easy on the valve train too, only requiring HD Single Springs and Bolt On Rocker Shafts, and works with 1.1 or 1.25 rockers! This is also compatible with stock Single Port or Dual Port Heads, and it works best with Compression from 7.5-8:1.
This cam is known as a "3 Bolt" cam, compatible with "early" oil pumps. The oil pump MUST be compatible with the engine case, and the camshaft, for proper engine lubrication!
This cam is NOT clearanced for Crankshafts of 78mm or more, but it will work great with strokes up to 76mm.
blir nog en W120, den fungerade kanon i 1914 motorn!
